Be ahead of the curve, act quickly when accurate data strikes at the heart of underperformance.
Air Quality Monitoring
enLink Air – LoRa Wireless Indoor Air Quality Monitor
These parameters include: Temperature, Humidity, Light Level, VOC’s, Carbon Dioxide, Particulate Matter (PM2.5 & PM10), Oxygen, Sound Level, Barometric Pressure, plus up to 4 plug-in calibrated gas sensors from a range of over 200 gases/sensitivities.
Real-time readings are transmitted to the cloud using long range LoRa wireless, where the data can be visualised and analysed.
enLink Air has the capacity for up to 4 additional plug-in gas sensors from a range of over 200 gases / sensitivities. The plug-in gas sensors are supplied as factory calibrated units together with calibration certificate.
The plug-in gas sensors have the added advantage that at the end of their life they can be easily replaced with new calibrated sensors through the detachable sensor cover plate.The optical O2 and CO2 sensors have a life expectancy of >5 years and >15 years respectively, compared with under 12 months for traditional sensors. All enLink Air sensors are fully digital, factory calibrated devices.
enLink IAQ – LoRa Wireless Indoor Air Quality Monitor
Measures key indoor air quality parameters with outstanding accuracy and resolution necessary for WELL® and RESET® projects.
- MCERTS certified particulate matter sensor provides precise measurements of PM1, PM2.5, PM4 and PM10.
- Ozone measurement down to single digit parts per billion (ppb) resolution using breakthrough self calibrating sensor arrays.
NDIR optical CO2 sensor for high accuracy and long life.
enLink IAQ reveals indoor air quality using leading edge optical and digital sensors to provide high accuracy, long life, drift free readings without further calibration.
enLink OAQ – LoRa Wireless Outdoor Air Quality Monitor
Available with temperature, relative humidity, pressure and with internationally approved Air Quality Index – AQI (based on Ozone and Nitrogen Oxide concentrations).
Data is transmitted via long range LoRaWAN wireless for remote analysis. Battery or externally powered to provide flexible installation options.
Measures key indoor air quality parameters with outstanding accuracy and resolution using fully calibrated sensors.
- MCERTS certified particulate matter sensor provides precise measurements of PM1, PM2.5, PM4 and PM10.
- Ozone measurement down to single digit parts per billion (ppb) resolution using breakthrough self calibrating sensor arrays.
- Flexible gas sensor socket, select one from CH2O, CO, NO2, H2S, SO2, O2
- AQI sensor detects Ozone and Nitrogen Oxides as low as 20 parts per billion (ppb) to provide an Air Quality Index (AQI) based on international standards.
enLink OAQ reveals outdoor air quality using leading edge optical and digital sensors to provide high accuracy, long life, drift free readings without further calibration.
enLink Air X – LoRa Wireless Outdoor Air Quality Monitor
Available with Temperature, Humidity, Oxygen, Carbon Monoxide, Ozone, VOC’s, Carbon Dioxide, Particulate Matter (PM2.5 & PM10) and many more.
Real-time readings are transmitted to the cloud using long range LoRa wireless, where the data can be visualised and analysed. Air-X is designed for outdoor monitoring applications.
enLink Air – X is an outdoor version of enLink Air and uses the latest optical gas sensing technologies to provide improved accuracy and dramatically extend sensor life expectancy with no drift.
The optical O2 and CO2 sensors have a life expectancy of >5 years and >15 years respectively, compared with under 12 months for traditional sensors. All enLink Air sensors are fully digital, factory calibrated devices.
enLink Air – X has long range LoRa wireless to transmit the data for up to 16km with deep in building penetration of 1-2km without repeaters. Data is received by any LoRaWAN compliant gateway to forward data to the cloud or other applications.
Optional sensor options also include – No2 Nitrogen Dioxide, CO Carbon Monoxide, H2S Hydrogen Sulphide, SO2 Sulphur Dioxide , CH20 Formaldehyde
enLink Zone – LoRa Wireless Environmental Sensor
Zone uses leading edge digital sensors to provide high accuracy, long life, drift free readings without further calibration. The optical CO2 sensor gives ±3% accuracy readings with a sensor life of > 15 years and automatic self-calibration. The Zone unit is battery powered with long life of over 3+ years.
A built in USB port allows all parameters including air quality data, wireless signal strength and wireless network configuration to be viewed and set using simple menus via any USB enabled host such as a PC or Mac.
enLink Zone provides all the measurement parameters necessary for effective climate control in commercial office buildings, schools, hotels, hospitals and other facilities. Using VOC’s and / or CO2-monitoring for demand control ventilation (DCV) allows healthy, comfortable and energy efficient environment for the occupants and operators.
enLink Zone Plus – LoRa Wireless Environmental Sensor
enLink Zone Plus uses leading edge digital sensors to provide high accuracy, long life, drift free readings without further calibration. The optical CO2 sensor gives ±3% accuracy readings with a sensor life of >15 years.
For sound level monitoring the Zone Plus uses a dedicated ARM co-processor for sound processing linked to a highly sensitive omnidirectional MEMS microphone with 24bit digital output to perform highly accurate sound level monitoring with dB(A) measurements.
The additional battery capacity of the Zone Plus allows it to sample the measurements more frequently whilst extending the interval between battery replacements. Up to four AA sized lithium batteries can be used.For applications where power is available the Zone Plus can be externally powered to offer maintenance free operation.
Energy Monitoring
enLink Modbus - LoRaWAN Modbus Bridge
enLink Modbus instantly converts wired Modbus devices such as meters, PLC’s and sensors to LoRa long range wireless. Any instrument, device or sensor with a wired Modbus RS485 interface can be read and converted to a LoRaWAN wireless device.
enLink Modbus can handle up to 32 Modbus readings, e.g. 5 Modbus slave devices each with 6 parameters per slave and transmits the data from the slaves periodically, based on a user configurable interval.
As with all enLink devices, your data is securely transferred using AES 128 encryption. Each unit is quickly and easily configured using simple menus via the USB connection. All parameters can be changed using the device menus and Modbus data can be read, converted and displayed to verify that the correct readings are being obtained from the Modbus devices. Once an individual Modbus data point has been correctly configured, a clone function allows the parameters to be copied to the next item to allow rapid configuration and verification of all Modbus data points.
DataStream – Networked Energy Data Logger
Powered by a high speed ARM® processor the DataStream has the capacity to acquire, process, record, present and stream data from multiple energy meters and environmental sensors.
The DataStream has pulse inputs, Modbus communications, analogue current transformer (CT) and wireless connectivity providing the ultimate flexibility for monitoring energy consumption. Energy usage is recorded at selectable intervals, typically 1/2 hourly. This data is stored on the DataStream and automatically sent to a central server, such as enVision, a third party Monitoring and Targeting package or a spreadsheet such as Microsoft® Excel® for further analysis.