Keeping Your Data Centre Secure
Data centre security is a big issue – especially for co-location centres hosting multiple racks for multiple, often competing clients. Whilst security to access the data centre can often be impressive, individual rack level security is often inadequate. Poor rack security is a potential risk given the number of staff and external engineers who walk through the data centre on a daily basis.
Optional keypad for two-factor authentication
Swing handle authorisation status
LED Temperature status (MLR3000(KP) and MLR5000(KP))
Integrated battery port enables it to function if the network/power is down
E-LINE BY DIRAK
MLR – Mechatronic Locks for Racks
- Keypad for two-factor authentication
- LED for handle and temperature status
- No key override
- TCP/IP Ethernet
- 125kHz HID Prox
- 13.56MHz HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2
- Storage capacity for 2,000 cards and pins
- Storage capacity for 500 events (offline) and 30 time profiles
- PoE IEEE 802.3af (Power over Ethernet) capable
- Label holder with customizable backlit LED
- LED for handle and temperature status
- No key override
- TCP/IP Ethernet
- 125kHz HID Prox
- 13.56MHz HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2
- Storage capacity for 2,000 cards and pins
- Storage capacity for 500 events (offline) and 30 time profiles
- PoE IEEE 802.3af (Power over Ethernet) capable
- Keypad for two-factor authentication
- LED for handle and temperature status
- No key override
- RS485
- 125kHz HID Prox
- 13.56MHz HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2
- Storage capacity for 2,000 cards and pins
- Keypad for two-factor authentication
- LED for handle status
- No key override
- Wiegand interface
- Multi-frequency antenna (125kHz and 13.56MHz) HID Prox, HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2, PIV LEAF
- Label holder with customisable backlit LED
- LED for handle status
- No key override
- Wiegand interface
- Multi-frequency antenna (125kHz and 13.56MHz) HID Prox, HID iClass, Mifare Classic, Mifare DESFire EV1, Mifare DESFire EV2, PIV LEAF
- Integration into existing management systems
- Label holder with customisable backlit LED
- LED for handle status
- No key override
- Interface via closing contact / direct power supply
iAccess Controller
Computer Cabinet Security & Door Access Control System
Rack security access control systems provide secure, managed access to computer racks. Know when your racks are being accessed and who by. It’s 1RU dual powered, rack-mountable design utilises smart card access control technology and is ideal for use in data centres and remote IT rooms, thanks to its internal web browser that can be access via standard web browser. Alternatively, it can be integrated into any data centre remote management platform (NMS, BMS, DCIM etc.) that uses SNMP to provide a centralised access control system, which also offers a full SNMP Audit Trail.
- 2 x Computer cabinet door locks with Wiegand entry card readers – Supplied to allow controlled entry of both front and rear doors of a standard data centre IT cabinet. Access can be made via key, card or remote external control.
- Optional iSensorPlus sensors – By utilising the optional 2 x iSensorPlus sensors, it is possible to monitor the temperature and humidity conditions within the cabinet.
- Optional LCD Keypad entry – An optional LCD Keypad can be installed to the standard iAccess door handles to provide keypad entry. On top of this it also displays lock status and environmental monitoring data when used in conjunction with the optional iSensorPlus temperature/humidity sensors.
- BMS Integration – BMS interface is made possible with isolated lock/door status Voltage Free Contacts and lock control inputs.
- Monitoring/configuration via web browser and/or SNMP – Monitoring of the iAccess Controller is possible over an Ethernet network via internal webserver and through the use of SNMP registers.
- E-mail notification – Event notification through SMTP e-mails are generated when thresholds are breached or contact status changes.
- SNMP Traps – Event notification through SNMP Traps are generated when thresholds are breached or contact status changes.
- SNMP Audit Trail – When integrated to a remote management platform (NMS, BMS, DCIM etc.) iAccess provides a full audit trail via SNMP, recording both authorised and unauthorised accesses. It provides a historical trail of who accessed which cabinet and the method used.
- 2 x Cabinet door locks and Wiegand entry card readers.
- Optional iSensorPlus Temperature & Humidity sensors.
- BMS Integration via isolated lock/door status Volt Free Contacts and lock control inputs.
- Network 10/100Mbps (Auto).
- Configuration/monitoring options – Internal website and SNMP.
- Power – Dual 240V IEC C13 (Max 0.5A).
- LED – Power supply (A & B), Ethernet.
- Dimensions – 1RU x 155mm depth.
- Weight – 1.2Kg